MPRCG2 (2023) Chair Leaving Detection Alarm with Caregiver Radio Pager

✓ Fall prevention chair leaving detection alarm with radio pager
✓ Raises an instant warning alarm to a caregiver when a person rises from their chair
✓ Quick and easy install ready to use straight out of the box
✓ Can be used singularly or as part of a multiple resident monitoring system

Included: 1 x BTX-21MP sensor alarm control transmitter, 1 x MP-PAG31 caregiver radio pager, 1 x MPUCP10L chair pressure mat sensor with connector cable, all required batteries.

The MPRCG2 is an all-inclusive kit to monitor a persons chair. The pressure sensor is placed under the chair cushion, or on top with a suitable material cover. When the person stands up from their chair the alarm transmitter signals the caregiver radio pager.

Key Features

• Fall prevention chair leaving detection alarm
• Exit notification relayed to caregiver via radio pager
• Antimicrobial disinfectant resistant sensor material
• Portable all battery-operated system
• Suitable for most chair types including wheelchairs
• Quick and easy setup and use
• 3-Channel pager can be used with 3 transmitter devices
• Add optional bed sensor, movement sensor, door contacts etc.

Technical Features MUCP10L Chair Sensor
Material: PVC
Conductive material: Silver and Carbon paste
Dimensions: 38cm x 25.5cm
PVC thickness: 0.45mm
Non-conductive material thickness: 5mm
Total uncompressed thickness: 6.4mm
Connector cable length: 1.95mm
Connectors: Female mini-USB to RJ12

Technical Features BTX21-MP Sensor Transmitter
Sensor triggered transmitter
Transmission frequency: 433MHz
Transmission range: 75-150M
Powered by 3 x AA 1.5V batteries
DC power adaptor input: 6V @1 amp (optional)
Output 6.33mm socket for nurse call connection
Input 6.3mm socket for cabled nurse call switch
Dimensions: 115mm x 75mm x 30mm
Locking (screw) battery compartment
Concealed external on/off switch
Connector cable strain relief clamp
Selectable alarm delay 2 seconds, 15 minutes
Wall fixing bracket included