The Medpage bed occupancy fall prevention alarm sends an alarm signal when a person leaves their bed. The portable alarm station has a 3-level sound alarm with ultra-bright flashing LED's. UP to 5 individual bed or chair alarms can be used with one or more alarm stations.

Transmitter specifications

·        Multi-Function sensor transmitter

·        Long range transmission (up to 400M)

·        2 x Trigger Input Sockets 2.5mm & 3.5mm

·        Trigger mode selectable for N/O or N/C

·        Secure On/Off Power switch (selectable)

·        FSK transmission 433.92MHz @ 10mW

·        POCSAG Message programable

·        Dimensions: L 145mm W 40mm D 22mm

·        Powered by 2 x AAA batteries

·        12 Month typical use before battery change

·        Low battery warning LED with transmission message

·        System status LED

CTM-3 features/specifications

• Power: 3 x AAA batteries (or optional A/C adaptor)
• Transmission range 100m
• Nurse call relay output
• 15 Minute alarm delay option (Night time W/C visits etc)
• Voice recorder (15 sec)
• Selector switch for floor pressure mat or bed leaving detection (same sensor)
• Alarms: voice/silent/beeper/alarm station
• Supplied with wall/bed holder
• Low battery warning
• Alarm reset button
• Dims: H 125mm W 75mm D 25mm (sensor transmitter)
• Dims: (included bed sensor pad) L 750mm W 450mm D 8mm Connector cord 2.5M
• TX frequency 433.92 MHz

NDMRX Wireless Alarm Receiver

• Selectable LED colours to identify transmitter device
• Multiple active alarm indication - selected transmitter colours flash alternately until alarms are cancelled
• Powered by 3 x AAA batteries
• Dimensions: H 80mm W 68mm D 38mm
• Optional mains AC power adaptor
• Compatible with all Easylink/Medpage transmitters
• Quick and easy to set up and use
• 3-level alarm tone volume switch (up to 96dB)
• Latched or timed alarm duration (continuous or 30 seconds)
• Power/signal/battery status LED
• Output for vibrating pad to aid deaf people
• Frequency 433.92 MHz (FSK)
• Long range capability
• Multiple alarm stations can be used with single or multiple transmitters
• Vibrating pad output 3v @ 300ma via 3.5mm jack socket
• Top focusing lens high intensity ceiling projecting LED’s
• On/off top light selection switch
• Price includes all batteries

Sysyem include 1 x CTM controller, 1 x CT3 bed sensor pad, 1 x NMDRX alarm receiver and all required batteries.