CSA11WBCK Patient bed and chair exit & return monitoring wireless alarm with carer pager

✓ High specification wireless sensor alarm controller for professional and domestic falls prevention systems
✓ Wireless alarm to radio pager for a patient leaving their bed or chair
✓ Last sensor alarm auto reset allows a patient to leave their bed and sit on a chair without alarm generation (selectable alarm delay duration)
✓ Can reduce care costs without compromising patient safety

This system was designed based on personal experiences of caring for a person prone to falls in the home. The alarm controller monitors the wireless signals from the bed and chair concealed sensor pad transmitters. A patient in bed or sitting on chair will confirm the system arming process. If the patient rises from their bed and fails to return within the selected alarm delay period, an alarm signal is transmitted to the carer pager. If they rise from their bed and sit on their chair within the alarm delay, the alarm is cancelled, and vice versa from chair to bed. The monitoring process can be extended by adding a PIR sensor, also configurable for last active sensor reset.

In a care home setting, up to 99 bed/chair alarm systems can be monitored by single, or multiple pagers. This provides the resident with more independence and reduces carer support time.
The system can also be linked to external monitoring systems including telephone auto diallers and Telecare systems.

UFMT10T Cordless floor alarm mat
TUMPIR21 Wireless PIR sensor
TXP11 Worn fall detection sensor

Key Features

• Logical method of falls prediction and prevention
• Allow users more freedom at home or in care
• User can move from bed to chair or vice versa
• Totally cordless sensor system for bed and chair
• Sensors can work independently or together
• Sensor transmitter concealed in sealable pouch
• Alarm controller signal to carer alarm pager
• Alarm controller output to telephone auto dialler or Telecare system
• Suitable for single of multiple users
• PAG-11 pager can monitor up to 99 MPCSA11 controllers
• Reduce care costs by reducing unnecessary room visits
• Quick and easy to install and maintain

Technical Features MPCSA11 Alarm Controller
Operation modes:
Direct transmitter alarm instant alarm from sensor signal
Configurable delay/cancel between alarm transmitters (up to 3)
Wireless frequency 433MHz
Wireless range typically 100M
Powered by 3 x AA batteries
Optional AC/DC power adaptor
Typical battery life 6-9 months
Power status LED
Cordless bed and chair pad alarm LEDs
Auxiliary wireless alarm alert LED
3 x Integral wireless alarm channels with channel active LEDs
1 x addressable alarm transmitter channel
Radio signal integrity monitoring
Monitor low battery warning
Sensor transmitter low battery warning
On-device button and wireless remote alarm reset (with compatible devices)
Alarm trigger inputs: 1 x cabled, 3 x wireless sensor pairing
Visual indication of active alarm device
Jack socket and RJ11 alarm trigger input
RED compliant
Nurse Call Telecare connection output

Technical Features PAG-11 Pager
Powered by 2 x AA batteries
Dimensions W 55mm H 75mm D 25mm
Frequency 433MHz
Receiving range up to 200M
Dimensions: H 80 W 55 D 25mm
Weight (including batteries) 118g
Alarm display, volume control, stored alarm review button
Radio integrity monitoring
Multi-User alarm identification display allows up to 99 devices to signal pager

Technical Features UFBP20 (Bed Sensor)
DIMS: Sensor Mat: 750 x 450mm
Integral transmitter 433MHz (included)
Transmitter DIMS: 65 x 55 x 12mm
Antimicrobial washable materials
Selector switch for bed/chair mode
Power On/Off switch
Operation/Setup check LED
Low battery transmission to pager
Pouch connector for transmitter or optional cable

Technical Features UCP10T (Chair Sensor)
DIMS: Sensor Mat: 350 x 250mm
Integral transmitter 433MHz (included)
Transmitter DIMS: 65 x 55 x 12mm
Antimicrobial washable materials
Selector switch for bed/chair mode
Power On/Off switch
Operation/Setup check LED
Low battery transmission to pager
Pouch connector for transmitter or optional cable