GSM TELEPHONE AUTO DIALLER Model EC-GSM1
Key Features
DIALS UP TO SIX USER EMERGENCY CONTACT NUMBERS
VOICE ANNOUNCEMENT MESSAGE ALLOWS UP TO 30 SECOND RECORDER
SMS EMERGENCY TEXT MESSAGE - UP TO 10 MESSAGES CAN BE STORED
SELECTIVE DIALLING SEQUENCE OF STORED NUMBERS
ON-LINE DIALLING CANCELLATION
BUILT IN TWO-WAY INTERCOM FUNCTION - DIAL IN TO TALK
BUILT IN MICROPHONE ALLOWS DIAL IN TO LISTEN TO SURROUNDING AUDIO
POWERED BY 12V DC POWER ADAPTOR WITH BATTERY BACKUP
PANIC BUTTON FUNCTION - PRESS TO CALL ASSIGNED NUMBER(S)
ENTRY & EXIT DELAY TIMERS.
CONNECTS AND DIRECTLY CONTROLS STANDARD SECURITY SIREN
EXTERNAL DIALLING TRIGGER INPUTS FOR CONNECTION TO SECURITY SYSTEM
PIN CODE PROTECTED FOR ARM & DISARM. FULL TAMPER PROTECTION
FEATURES AC MAINS POWER FAILURE TEXT AND VOICE ALERTS
TEXT AND VOICE ALERTS WHEN MAINS POWER IS RESTORED
Technical
DIALLING - UP TO SIX TELEPHONE NUMBERS UP TO 16 DIGITS
DIALLING ATTEMPTS CAN BE SET FROM 2 - 9
BANDWIDTH GSM900 X Tx890~915 Mhz. DCS1800 Tx1710~1785 Mhz.
ALARM INPUT TRIGGER - N/O & N/C.
BATTERY BACK-UP 3 X AA Ni-MH 2200 mA FOR 20 HOUR BACK-UP
DIMENSIONS 200 x 135 x 35mm weighs 1200 (packed)
SIREN OUTPUT CURRENT (MAX) 250 mA. SIM CARD NOT SUPPLIED.
MANUFACTURED IN THE UK. 12 MONTH GUARANTEE
The EC-GSM1 can send text alert messages to mobile telephones and is equipped with
a voice sampler module so that you can record an outgoing emergency message of up
to 20 seconds for use with land line telephones. The dialler has connection terminals
that will power and control most commercial security claxons to enable a low cost
security system with GSM dialling to be installed. The dialler has terminals that
allow multiple door contact switches to connected to trigger dialling and alarm claxon
operation. The dialler also features an exit and entry delay that can be changed
to suit the users preference. A panic button can be simply programmed to a contact
telephone number that is called when the button is pressed.
The dialler also includes an alarm with text or voice announcement of loss of AC
mains power to the unit. The dialler will send an alert for mains power failure and
another if and when mains power is restored.
