CMU-02 Wall mounting wireless nurse call station alarm receiver with caller ID

✓ Central monitoring alarm station for use with all Rondish patient care transmitters
✓ Backlit caller ID LCD display for device type and user ID number
✓ Multiple-zone addressable with capacity for 200 patient call devices
✓ Adjustable volume control for alarm notifications

This multi-purpose Central Monitor unit can operate in small stand-alone systems, or can be the heart of an extensive Rondish wireless, or cabled alarm system. Ease of installation, simplicity of operation and economy is the main theme. The central monitoring system combines with our door monitoring and bed monitoring systems, wristband wireless transmitters, stand-alone waterproof buttons and other Rondish products, to provide indication and display of alarm calls. Automatically detected equipment faults on various products can be identified and displayed on the front panel LCD.

Key Features

• The Central Monitor unit has a large LCD display
• Selectable automatic out of range (OORC) and interference check with indication.
• Automatic AC mains supply fail detect with indication
• Indicates and can send on automatic fault alerts from other Rondish equipment
• Standard pre-prepared (plug-in) interconnection cables
• Compatible with other Rondish systems and monitoring equipment
• Data output for system integration e.g. auto-dialler, printer, large display etc.
• Selectable Caregiver proximity key, or manual button Reset function for local operation
• Optional coded keypad Reset function
• Sounder volume adjustment
• Central monitor area/ID selection (8 codes)
• Data bus output for connecting multiple Central Monitor units
• Alarm outputs for external indicators, or other slave equipment
• Output for large external display
• 12Vdc AC mains adaptor/power supply connection
• Central Monitor internal
• Battery back-up with low battery detection

Technical Specifications
Operating Frequency: 433.92MHz
Operating Power (a) AC mains adaptor (for regional AC voltage input): Regulated 12Vdc output (CE approved), or Batteries: 6V (4 x D type cells)
Current rating for Central Monitor (no door lock, or flash light) = 250mA
Battery life: In standby (AC mains fail) mode, assured 10 hours - dependent upon alarm activity
Relay contact output: Normally open volt-free contact.
Maximum rating for relay output contacts: 1 amp (e.g. for door lock)
Display: Simultaneous alpha-numeric text for several detected patient transmitter units. These alarms rotate in the display window.
User selectable Reset function
Adjustable sounder volume (potentiometer)
Low battery and AC power loss detection with alert
Automatic Out Of Range and Interference detection with alert (used with Door Monitor)
Dimensions of housing: 210mm x 150mm x 45mm